Tips For Replacing a Window Handle
The replacement of your window handle is a simple project that can be completed in the at-home comforts of your home. Follow these guidelines to ensure an elegant and smooth finish.
Begin by removing the screws to reveal the screws within your uPVC window handle. Then, measure the length of the spindle to ensure that you receive the correct size replacement.
1. Measure the Spindle length
It's important that you have the right size spindle when replacing a window handle. It could influence the tightness or looseness of the handle, as well as whether the handle will lock properly into the window frame. The spindle is a metallic shaft that connects the handle to the lock inside the frame of the window. The spindle is either a standard industry 8mm cross-section or the earlier 9mm versions. Modern industry standards are 8mm, but it wasn't always the case. It is crucial to check the measurements when purchasing a new handle.
Remove the handle. This is done by turning the handle to the open position, and taking off two screws that secure the handle (which are usually hidden behind plastic caps which will need to removed). After removing the handle, measure from the base of the handle to the end of the spindle. This will provide you with the measurements you need to buy a replacement.
There are many options available when it comes time to choose the right window handle. From sleek chrome that fits into a modern home to traditional burnished bronze that looks great in restored Georgian rooms, or the more traditional Tudor cottages with curled mongoose-tail latches. The options are endless but the most important thing to do is choose a style that complements your home.
Espag handles are typically fitted to uPVC window frames and are always the same size with a 43mm central. Cockspur handles range from 58mm to 62mm but luckily there are replacements available for both sizes. Window handles from Cadenza are a different size again as they have an angled blade that operates an interlocking mechanism that is multi-point inside the window.
Another consideration when selecting the best window handle is knowing what hand you will need to use. This is determined by the hand you use to open the door. Inline Espag window handles aren't handed and can be utilized for left or right handed windows. Cranked window handles are hand-operated and can only be used on windows that open in one direction.
2. Take the handle off
A window handle that is sagging can be frustrating, regardless of whether the handle is damaged or worn out. The good news is that you can replace the uPVC handle by yourself. You only need the most basic hand tools and some time to complete the task.
First, you must open the window and make sure that it is in an unlocked position. Next, you need to remove the screw caps which hold the handle in place. After these have been removed, you can start working on the removal of the handle itself.
The handle is attached to a spindle within the window frame. Depending on the kind it is held in place by a screw or pin. The most common handles are the inline Espagnolette and the cockspur handles. Both these types of handles are used on casement windows, which includes windows made of aluminium. They can be locked with keys to prevent the opening of the window from the outside, or you can lock them by turning the handle clockwise.
To take the handle off, you will need to use a flat blade screwdriver to remove the clip that holds the handle in place. After the clip has been released, the handle should be able to slide off the spindle. After the handle is removed, you'll need measure the spindle length and ensure that the new handle will fit.
Once you have decided on the proper size of the handle, screw it in place. It is crucial to ensure that the handle is properly attached and that it is rotating in the correct direction (clockwise if the handle is open and counterclockwise if handle closes). It is important to ensure that the handle has not been placed upside down.
Then, you must replace the screw cover caps. Once you have done this then you can test the handle to confirm that it is working correctly. It is also recommended to test the locking mechanism by moving the handle until it is locked position and then back again.
3. Take off the Screws
A uPVC handle is an important part of any house and is the first item to show signs of wear or damage. It can be caused by natural elements or by frequent use, and sometimes malicious damage caused by opportunistic criminals who might seek to open a closed window to gain access to your property. A simple repair can fix the issue and prevent it from happening again.
uPVC handles could also be difficult to remove when the locking mechanisms are not functioning properly. It's often possible to solve the problem by replacing the multipoint locking mechanism rather than the entire handle. This can save you money.
After you have removed the handle, you'll need to remove any screws that were holding it in place. They are usually located on the inside of the base. It is possible to use a screwdriver accomplish this. Be cautious not to over tighten the handle, as this can cause it to become loose.
Then, you'll need to locate the pins or screws that hold the handle in place. They are typically located on the inside of the base of the handle. You'll need a screwdriver to take them off. After you have removed them, you'll be required to replace the caps on the screws in the event that you want to do so and test the new handle to make sure it's working correctly.
When you're ready to install the new handle, simply line up the spindle with the cut-out in the window mechanism and screw it into the right position. Make sure that the handle is in the open position and that the screws are tightly fixed before replacing the screws' covers, in the event that you want to do so. It's done! You can enjoy the newly installed window handle. We hope this will allow you to avoid the need for expensive replacement of your door and window in the future. Contact us if need more information about this or any aspect of your uPVC window.
4. Install the new handle
The procedure of replacing a damaged window handle or updating it is simple and can be completed within a few easy steps. Identifying the type of window handle, determining its spindle length, and knowing the tools you'll require to complete the task are key. Safety is always the first priority when working with windows and tools. Be sure to follow the steps and make sure that you have an appropriate handle for use.
To begin, locate the screws that hold your window handle in place. Remove these while firmly gripping the handle to prevent it from falling down and causing injury. Once Repair My Windows And Doors have been removed they can be repositioned in a secure location to be replaced later.
After you have removed the handle, you are now able installing your new handle. The handle must be fitted perfectly to function properly and keep the window in its closed position. The next step is to slide the square metal bar at the back of the handle into the hole of your window mechanism, ensuring that it fits securely.
Now that the new handle is in place, the final thing to do is to replace the caps on the screws and test it to make sure it works. If you aren't satisfied with the result or the window doesn't shut or open properly contact our experts for assistance.
Most UK homes are equipped with uPVC Windows. Therefore, a large number of windows will need to be changed at some point because of wear and tear or breakage. The process is relatively straightforward and can be completed by anyone with some knowledge of DIY. It is essential that the handle you choose matches the size and style of the window. If you're unsure about what kind of handle you'll require, please reach out to our team, who can provide you with the options available.